Sortiere nach: Autor, Jahr, Titel
Literaturliste
- Bayesian analysis of uncertainties in circle, straight-line and ellipse fitting considering a-priori knowledge − comparative analysis with total-least-squares approaches.
Surface Topography: Metrology and Properties, S. 14. (2024)
DOI: 10.1088/2051-672X/ad2ba0
https://iopscience.iop.org/article/10.1088/2051-672X/ad2ba0 - Comprehensive angular scattering distribution analysis for resource-efficient manufacturing.
Procedia CIRP, S. 6. (2024)
DOI: 10.1016/j.procir.2023.09.007
https://www.sciencedirect.com/science/article/pii/S2212827123007394?via%3Dihub - Comprehensive profile and areal calibration by additively manufactured material measures.
Surface Topography: Metrology and Properties, S. 30. (2024)
DOI: 10.1088/2051-672x/ad2985
https://iopscience.iop.org/article/10.1088/2051-672X/ad2985 - Control concept for the regulation of the surface layer properties using consecutive cuts in cryogenic hard turning of AISI 52100.
Production Engineering, S. 13. (2024)
DOI: 10.1007/s11740-023-01259-7
https://link.springer.com/article/10.1007/s11740-023-01259-7 - Low-Cost Predictive Maintenance Monitoring Concept for Forming Presses.
Procedia CIRP, S. 6. (2024)
DOI: 10.1016/j.procir.2023.09.220
https://www.sciencedirect.com/science/article/pii/S2212827123009526?via%3Dihub - Application of Smart Overpressure Protection Devices to batch and semi-batch processes: The zero-emission mode.
Process Safety and Environmental Protection, S. 12. (2023)
DOI: 10.1016/j.psep.2023.11.061
https://www.sciencedirect.com/science/article/pii/S0957582023010662?via%3Dihub - Ball-end micro-milling of material measures: wear behavior in field use.
International Journal of Advanced Manufacturing Technology, Vol. 128, Nr. 1, S. 13. (2023)
DOI: 10.1007/s00170-023-11856-6
https://link.springer.com/article/10.1007/s00170-023-11856-6 - Compact hand-guided 3D scanning terahertz sensor platforms with 3D-printed aspherical telecentric f-θ lens.
International Journal of Microwave and Wireless Technologies, Vol. 15, Nr. 6, S. 11. (2023)
DOI: 10.1017/S1759078723000259
https://www.cambridge.org/core/journals/international-journal-of-microwave-and-wireless-technologies/article/compact-handguided-3d-scanning-terahertz-sensor-platforms-with-3dprinted-aspherical-telecentric-f-lens/4DE80227E18BF9ACE7D31DC688252341 - Compatibility analysis of profile and areal material measures.
Optical Measurement Systems for Industrial Inspection XIII : 26-29 June 2023, Munich, Germany, (2023)
DOI: 10.1117/12.2672243 - Construction of a time-domain full-field OCT for non-contact volumetric layer thickness measurement.
Optical Measurement Systems for Industrial Inspection XIII : 26-29 June 2023, Munich, Germany, (2023)
DOI: 10.1117/12.2673664 - Discrete Filter and Non-Gaussian Noise for Fast Roughness Simulations with Gaussian Processes.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes, (2023)
DOI: 10.1007/978-3-031-35779-4_1
https://link.springer.com/chapter/10.1007/978-3-031-35779-4_1 - Extreme Ultra-Wideband Optoelectronic Frequency-Modulated Continuous-Wave Terahertz Radar.
Laser and Photonics Reviews, Vol. 17, Nr. 11, S. 11. (2023)
DOI: 10.1002/lpor.202300396
https://onlinelibrary.wiley.com/doi/10.1002/lpor.202300396 - Geometrical, Microstructural, and Chemical Characterization.
Component Surfaces : Manufacturing-Morphology-Property Relationships, (2023)
DOI: 10.1007/978-3-031-35575-2_2
https://link.springer.com/chapter/10.1007/978-3-031-35575-2_2 - Insufficiency-Driven DNN Error Detection in the Context of SOTIF on Traffic Sign Recognition Use Case.
IEEE Open Journal of Intelligent Transportation Systems, Vol. 4, S. 13. (2023)
DOI: 10.1109/ojits.2023.3236531
https://ieeexplore.ieee.org/document/10016638 - Interrelationship of Manufacturing, Surface Morphology, and Properties of Titanium.
Component Surfaces : Manufacturing-Morphology-Property Relationships, (2023)
DOI: 10.1007/978-3-031-35575-2_10
https://link.springer.com/chapter/10.1007/978-3-031-35575-2_10 - Manufacturing of Areal Material Measures.
Component Surfaces : Manufacturing-Morphology-Property Relationships, (2023)
DOI: 10.1007/978-3-031-35575-2_13
https://link.springer.com/chapter/10.1007/978-3-031-35575-2_13 - Manufacturing-Morphology-Property Relationships for Biofilms.
Component Surfaces : Manufacturing-Morphology-Property Relationships, (2023)
DOI: 10.1007/978-3-031-35575-2_17
https://link.springer.com/chapter/10.1007/978-3-031-35575-2_17 - Model of rough surfaces with Gaussian processes.
Surface Topography: Metrology and Properties, Vol. 11, Nr. 1, S. 9. (2023)
DOI: 10.1088/2051-672X/acbe55
https://iopscience.iop.org/article/10.1088/2051-672X/acbe55 - Robust surface profile envelope estimation using a beam-surface contact model.
Surface Topography: Metrology and Properties, Vol. 11, Nr. 1, S. 7. (2023)
DOI: 10.1088/2051-672X/acb806
https://iopscience.iop.org/article/10.1088/2051-672X/acb806 - Scientific modeling of optical 3D measuring devices based on GPU-accelerated ray tracing using the NVIDIA OptiX Engine.
Modeling Aspects in Optical Metrology IX : 26-28 June 2023, Munich, Germany, (2023)
DOI: 10.1117/12.2673777 - Sparse surface profile reconstruction from scattering light distributions.
Optical Measurement Systems for Industrial Inspection XIII : 26-29 June 2023, Munich, Germany, (2023)
DOI: 10.1117/12.2673175 - Sub-zero milling of Ti-6Al-4V—impact of the cutting parameters on the resulting forces, tool wear, and surface quality.
International Journal of Advanced Manufacturing Technology, Vol. 126, Nr. 7, S. 15. (2023)
DOI: 10.1007/s00170-023-11334-z
https://link.springer.com/article/10.1007/s00170-023-11334-z - Depth-resolved characterization of cryogenic hard turned surface layer of AISI 52100 by X-ray diffraction and scanning electron microscopy investigations.
Procedia CIRP, Vol. 108, S. 6. (2022)
DOI: 10.1016/j.procir.2022.03.015
https://www.sciencedirect.com/science/article/pii/S2212827122004954?via%3Dihub - Determination of the characteristics of a self-built coherence scanning interferometer with a universal calibration artefact.
Interferometry XXI : 24-25 August 2022, San Diego, California, United States, (2022)
DOI: 10.1117/12.2633483 - Improving multi-photon lithography with machine learning.
Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XV : 22-27 January 2022, San Francisco, California, United States : 20-24 February 2022, online, (2022)
DOI: 10.1117/12.2607238 - Investigation of the surface integrity when cryogenic milling of Ti-6Al-4V using a sub-zero metalworking fluid.
Procedia CIRP, Vol. 108, S. 6. (2022)
DOI: 10.1016/j.procir.2022.03.010
https://www.sciencedirect.com/science/article/pii/S221282712200484X?via%3Dihub - Parameter Identification of an Abrasive Manufacturing Process With Machine Learning of Measured Surface Topography Information.
Journal of Computing and Information Science in Engineering, Vol. 22, Nr. 4, S. 15. (2022)
DOI: 10.1115/1.4053670
https://asmedigitalcollection.asme.org/computingengineering/article-abstract/22/4/041010/1133476/Parameter-Identification-of-an-Abrasive?redirectedFrom=fulltext - Predictive modelling of cryogenic hard turning of AISI 52100 based on response surface methodology for the use in soft sensors.
Procedia CIRP, Vol. 108, S. 6. (2022)
DOI: 10.1016/j.procir.2022.04.070
https://www.sciencedirect.com/science/article/pii/S2212827122005327?via%3Dihub - Active Noise Control in Commercial Vehicles.
Commercial vehicle technology 2020/2021 : proceedings of the 6th Commercial Vehicle Technology Symposium, (2021)
DOI: 10.1007/978-3-658-29717-6_19
https://link.springer.com/chapter/10.1007/978-3-658-29717-6_19 - Adaptive IIR Filtering For Online System Identification With Stability Monitoring.
2021 The 9th International Conference on Control, Mechatronics and Automation : ICCMA 2021 : University of Luxembourg, November 11-14, 2021 (2021) [International Conference on Control, Mechatronics and Automation (9. : 2021 : Online)], (2021)
DOI: 10.1109/ICCMA54375.2021.9646182 - Analysis of dimensional accuracy for micro-milled areal material measures with kinematic simulation.
International Journal of Advanced Manufacturing Technology, Vol. 116, Nr. 9, S. 16. (2021)
DOI: 10.1007/s00170-021-07629-8
https://link.springer.com/article/10.1007%2Fs00170-021-07629-8 - Condition Monitoring for Agricultural Vehicles using Magnetoresistive Sensors.
Commercial vehicle technology 2020/2021 : proceedings of the 6th Commercial Vehicle Technology Symposium, (2021)
DOI: 10.1007/978-3-658-29717-6_25
https://link.springer.com/chapter/10.1007/978-3-658-29717-6_25 - Define and measure the dimensional accuracy of two-photon laser lithography based on its instrument transfer function.
Journal of Physics: Photonics, Vol. 3, Nr. 3, S. 10. (2021)
DOI: 10.1088/2515-7647/abfaa7
https://iopscience.iop.org/article/10.1088/2515-7647/abfaa7 - Development of a condition monitoring approach as a product-service system for agricultural machinery.
Commercial vehicle technology 2020/2021 : proceedings of the 6th Commercial Vehicle Technology Symposium, (2021)
DOI: 10.1007/978-3-658-29717-6_31
https://link.springer.com/chapter/10.1007/978-3-658-29717-6_31 - Kinematic simulation to investigate the influence of the cutting edge topography when ball end micro milling.
Procedia CIRP, (2021)
DOI: 10.1016/j.procir.2021.09.019
https://www.sciencedirect.com/science/article/pii/S2212827121007629?via%3Dihub - Metrological characteristics of material measures depending on manufacturing parameters in direct laser writing and external stress factors.
Optical Measurement Systems for Industrial Inspection XII : 21-25 June 2021, online only, Germany, (2021)
DOI: 10.1117/12.2591655
https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11782/2591655/Metrological-characteristics-of-material-measures-depending-on-manufacturing-parameters-in/10.1117/12.2591655.short - New material measure for the calibration of areal-optical measuring instruments and its demands on fabrication.
Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XIV : 6-11 March 2021, online only, United States, (2021)
DOI: 10.1117/12.2579635 - Physical Modeling of Full-Field Time-Domain Optical Coherence Tomography.
Open Access Series in Informatics, Vol. 89, S. 22. (2021)
DOI: 10.4230/OASIcs.iPMVM.2020.14
https://drops.dagstuhl.de/opus/volltexte/2021/13763/ - Stabilization of Nonlinear Continuous Systems Based on Discrete Integrator Backstepping.
2021 The 9th International Conference on Control, Mechatronics and Automation : ICCMA 2021 : University of Luxembourg, November 11-14, 2021 [International Conference on Control, Mechatronics and Automation (9. : 2021 : Online)], (2021)
DOI: 10.1109/ICCMA54375.2021.9646216 - Towards a continuous frequency band chirp material measure for surface topography measuring instrument calibration.
Optical Measurement Systems for Industrial Inspection XII : 21-25 June 2021, online only, Germany, (2021)
DOI: 10.1117/12.2591935 - Traceable functional characterization of surface topography with angular-resolved scattering light measurement.
Surface Topography: Metrology and Properties, Vol. 9, Nr. 3, S. 16. (2021)
DOI: 10.1088/2051-672X/ac2031
https://iopscience.iop.org/article/10.1088/2051-672X/ac2031/meta - A model of confocal microscopy measurements combining empirical and physical properties.
Measurement Science and Technology, Nr. 32/2, (2020)
DOI: 10.1088/1361-6501/abbe3a
https://iopscience.iop.org/article/10.1088/1361-6501/abbe3a - Comparison of material measures for areal surface topography measuring instrument calibration.
Surface Topography: Metrology and Properties, Nr. 8/2, (2020)
DOI: 10.1088/2051-672X/ab92ae
https://iopscience.iop.org/article/10.1088/2051-672X/ab92ae - Crossing-The-Line Segmentation as a Basis for Rsm and Rc Evaluation.
Surface Topography: Metrology and Properties, Nr. 8/2, (2020)
DOI: 10.1088/2051-672X/ab958c
https://iopscience.iop.org/article/10.1088/2051-672X/ab958c - Determination of the surface topography of ball end micro milled material measures.
Engineering Science and Technology, an International Journal, (2020)
DOI: 10.1016/j.jestch.2020.08.005
https://www.sciencedirect.com/science/article/pii/S2215098620312052?via%3Dihub - Forecast of the fatigue crack initiation site of commercially pure Titanium miniature specimens with local surface topography data.
MATEC Web of Conferences, (2020)
DOI: 10.1051/matecconf/202032111008
https://www.matec-conferences.org/articles/matecconf/abs/2020/17/matecconf_ti2019_11008/matecconf_ti2019_11008.html - HoloPort – Submikrometergenau 3D-Messen in der Werkzeugmaschine [HoloPort – Submicron 3D measuring in the machine tool].
Technisches Messen, (2020)
DOI: 10.1515/teme-2019-0134
https://www.degruyter.com/view/journals/teme/87/3/article-p210.xml?rskey=WH1wq4&result=3 - ISOBUS Simulatorforsmall and medium-scale manufacturers and farmers.
Informatik in der Land-, Forst- und Ernährungswirtschaft : Fokus: Digitalisierung für Mensch, Umwelt und Tier : Referate der 40. GIL-Jahrestagung, 17.-18. Februar 2020 Campus Weihenstephan, Freising [GIL-Jahrestagung (40. : 2020 : Freising)], (2020) - In-process and ex-situ measurement techniques for the characterization of surface conditions during cryogenic hard turning of AISI 52100 [In-process- und ex-situ-Messverfahren zur Charakterisierung des Randschichtzustands beim kryogenen Hartdrehen von AISI 52100].
Technisches Messen, Nr. 87/11, (2020)
DOI: 10.1515/teme-2020-0053
https://www.degruyter.com/view/journals/teme/ahead-of-print/article-10.1515-teme-2020-0053/article-10.1515-teme-2020-0053.xml - Influence of different cooling strategies during hard turning of AISI 52100 - part I: thermo-mechanical load, tool wear, surface topography and manufacturing accuracy.
Procedia CIRP, Nr. 87, (2020)
DOI: 10.1016/j.procir.2020.02.085
https://www.sciencedirect.com/science/article/pii/S2212827120302110?via%3Dihub - Influence of different cooling strategies during hard turning of AISI 52100 – part II: characterization of the surface and near surface microstructure morphology.
Procedia CIRP, Nr. 87, (2020)
DOI: 10.1016/j.procir.2020.02.094
https://www.sciencedirect.com/science/article/pii/S2212827120302201?via%3Dihub - Lagerung UP-gedrehter Kalibriernormale – Einfluss der Lagerbedingungen auf die Eigenschaften der Kalibriernormale.
wt Werkstattstechnik online, Vol. 110, Nr. 11-12, S. 7. (2020)
DOI: 10.37544/1436-4980-2020-11-12-36
https://elibrary.vdi-verlag.de/10.37544/1436-4980-2020-11-12/wt-werkstattstechnik-online-jahrgang-110-2020-heft-11-12?page=1 - Micro milling of areal material measures –Study on surface generation for different up and down milling strategies.
Procedia CIRP, Nr. 87, (2020)
DOI: 10.1016/j.procir.2020.02.073
https://www.sciencedirect.com/science/article/pii/S2212827120301992?via%3Dihub - Performance specification of areal surface texture instruments exemplified by a self-built WLI.
Interferometry XX : 24 August-4 September 2020, online only, United States [Interferometry (Veranstaltung : 2020 : Online)], (2020)
DOI: 10.1117/12.2567666 - Performance verification of areal surface texture measuring instruments with the Sk-parameters.
Measurement, Nr. 173, (2020)
DOI: 10.1016/j.measurement.2020.108550
https://www.sciencedirect.com/science/article/abs/pii/S0263224120310745 - Reference Tracking of Dynamic System Using Prefilter and Integral Extension.
IOP Conference Series: Materials Science and Engineering, Vol. 922, Nr. 1, (2020)
DOI: 10.1088/1757-899X/922/1/012001
https://iopscience.iop.org/article/10.1088/1757-899X/922/1/012001 - Surface conditioning in machining processes [Oberflächenkonditionierung in der Zerspanung].
Technisches Messen, Nr. 87/11, (2020)
DOI: 10.1515/teme-2020-0044
https://www.degruyter.com/view/journals/teme/ahead-of-print/article-10.1515-teme-2020-0044/article-10.1515-teme-2020-0044.xml - Virtual topography measurement with transfer functions derived by fitted time series models.
Measurement Science and Technology, Nr. 31/5, (2020)
DOI: 10.1088/1361-6501/ab5131
https://iopscience.iop.org/article/10.1088/1361-6501/ab5131 - Zwei-Photonen Laserlithografie zur individuellen Herstellung von Normalen für die optische Rauheitsmesstechnik.
Sächsisches Geometriesymposium 2020 : Tolerierung - Fertigung - Messtechnik - Daten : Tagungsband [Sächsisches Geometriesymposium (2020 : Chemnitz)], (2020) - An algorithm for measuring the hydraulic jump height of an airfoil in a water table.
Measurement, (2019)
DOI: 10.1016/j.measurement.2019.106854
https://www.sciencedirect.com/science/article/pii/S0263224119307110 - Anwendungsfall BHN/Lenze/Schaeffler.
Entwicklung datenbasierter Produkt-Service Systeme, (2019)
DOI: 10.1007/978-3-662-59643-2_8
https://link.springer.com/chapter/10.1007/978-3-662-59643-2_8 - Anwendungsfall GRIMME.
Entwicklung datenbasierter Produkt-Service Systeme : ein Ansatz zur Realisierung verfügbarkeitsorientierter Geschäftsmodelle, (2019)
DOI: 10.1007/978-3-662-59643-2_6
https://link.springer.com/chapter/10.1007/978-3-662-59643-2_6 - Approach for the observation of surface conditions in-process by soft sensors during cryogenic hard turning.
Procedia CIRP, Nr. 81, (2019)
DOI: 10.1016/j.procir.2019.03.304
https://www.sciencedirect.com/science/article/pii/S2212827119306092 - Ball end micro milling of areal material measures: influence of the tilt angle on the resulting surface topography.
Production Engineering, Nr. 12/2, (2019)
DOI: 10.1007/s11740-019-00943-x
https://link.springer.com/article/10.1007%2Fs11740-019-00943-x - Comparison of material measures for the determination of transfer characteristics of surface topography measuring instruments.
Surface Topography: Metrology and Properties, Nr. 7/1, (2019)
DOI: 10.1088/2051-672X/ab0dc6
https://iopscience.iop.org/article/10.1088/2051-672X/ab0dc6 - Correlation between different cutting conditions, surface roughness and dimensional accuracy when ball end micro milling material measures with freeform surfaces.
Machining Science and Technology, Nr. 24/3, (2019)
DOI: 10.1080/10910344.2019.1698611
https://www.tandfonline.com/doi/abs/10.1080/10910344.2019.1698611?journalCode=lmst20 - Design and machining of a calibration artefact for an angular-resolved scattering light sensor.
Proceedings of the 19th International Conference of the European Society for Precision Engineering and Nanotechnology : June 3rd-7th June 2019, Bilbao, ES [European Society for Precision Engineering and Nanotechnology. International Conference & Exhibition (19. : 2019 : Bilbao)], (2019) - Development of a Convolutional Autoencoder Using Deep Neuronal Networks for Defect Detection and Generating Ideal References for Cutting Edges.
Optical Measurement Systems for Industrial Inspection XI [Optical Measurement Systems for Industrial Inspection (Veranstaltung : 11. : 2019 : München)], (2019)
DOI: 10.1117/12.2525882 - Effects of vibratory finishing of 304 stainless steel samples on areal roughness parameters: A correlational analysis for anisotropy parameters.
Journal of Materials Processing Technology, (2019)
DOI: 10.1016/j.jmatprotec.2019.116256
https://www.sciencedirect.com/science/article/pii/S0924013619302201 - Entwicklung eines akustischen Füllstandsensors für mobile Schüttgutsilos.
20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019, (2019)
DOI: 10.5162/sensoren2019/P2.3 - Entwicklung intelligenter, kommunikationsfähiger Komponenten.
Entwicklung datenbasierter Produkt-Service Systeme : ein Ansatz zur Realisierung verfügbarkeitsorientierter Geschäftsmodelle, (2019)
DOI: 10.1007/978-3-662-59643-2_4
https://link.springer.com/chapter/10.1007/978-3-662-59643-2_4 - Flächenhafte Messgeräte mit nur einer Probe kalibrieren.
Mikroproduktion, Vol. 2019, Nr. 02, S. 4. (2019)
http://www.mikroproduktion.com/fachzeitschrift.html - Implementation of a Dynamic Product Development Method for Agricultural Engineering Based on Virtual Prototypes.
Land.Technik AgEng 2019 : 77th International Conference on Agricultural Engineering : November 8th-9th 2019, Hannover, (2019)
DOI: 10.51202/9783181023617-273 - Micro Milling of Areal Material Measures: Influence of the Manufacturing Parameters on the Surface Quality = Mikrofräsen Flächenhafter Kalibriernormale: Einfluss Der Fertigungsparameter auf die Oberflächenqualität.
Production at the Leading Edge of Technology, (2019)
DOI: 10.1007/978-3-662-60417-5_26 - Micro hardness determination on a rough surface by using combined indentation and topography measurements.
Surface Topography: Metrology and Properties, Nr. 7/4, (2019)
DOI: 10.1088/2051-672X/ab518a
https://iopscience.iop.org/article/10.1088/2051-672X/ab518a - Model-based design of areal material measures with component surfaces.
Surface Topography: Metrology and Properties, Nr. 7/4, (2019)
DOI: 10.1088/2051-672X/ab5c83
https://iopscience.iop.org/article/10.1088/2051-672X/ab5c83/meta - Realisierung verfügbarkeitsorientierter Geschäftsmodelle in der Investitionsgüterindustrie.
Dienstleistungsinnovationen durch Digitalisierung. Band 1., Geschäftsmodelle - Methoden - Umsetzungsbeispiele, (2019)
DOI: 10.1007/978-3-662-62144-8_9
https://link.springer.com/chapter/10.1007/978-3-662-62144-8_9 - Rk material measure: A model based design [Rk-Normal – Eine modellbasierte Auslegung].
Technisches Messen, Nr. 86/9, (2019)
DOI: 10.1515/teme-2019-0091
https://www.degruyter.com/view/j/teme.2019.86.issue-9/teme-2019-0091/teme-2019-0091.xml - User-Oriented Evaluation of the Metrological Characteristics of Areal Surface Topography Measuring Instruments.
Optical Measurement Systems for Industrial Inspection XI [Optical Measurement Systems for Industrial Inspection (Veranstaltung : 11. : 2019 : München)], (2019)
DOI: 10.1117/12.2526005 - 3D printing of material measures for areal surface texture (Conference Presentation).
3D Printed Optics and Additive Photonic Manufacturing : 23-24 April 2018, Strasbourg, France, (2018)
DOI: 10.1117/12.2307560
https://www.spiedigitallibrary.org/conference-proceedings-of-spie/10675/2307560/3D-printing-of-material-measures-for-areal-surface-texture-Conference/10.1117/12.2307560.short - Application of function-oriented roughness parameters using confocal microscopy.
Engineering Science and Technology, an International Journal, Nr. 21/3, (2018)
DOI: 10.1016/j.jestch.2018.04.004
https://www.sciencedirect.com/science/article/pii/S2215098618302246 - Bayesian approach for circle fitting including prior knowledge.
Surface Topography: Metrology and Properties, Nr. 6/3, (2018)
DOI: 10.1088/2051-672X/aad2b4
https://iopscience.iop.org/article/10.1088/2051-672X/aad2b4/meta - Calibration sample for arbitrary metrological characteristics of optical topography measuring instruments.
Optics Express, Vol. 26, Nr. 13, S. 16609. (2018)
DOI: 10.1364/OE.26.016609
https://www.osapublishing.org/oe/abstract.cfm?uri=oe-26-13-16609 - Combined development and test of product-service systems in early product development stages for customized, availability-oriented business models in the capital goods industry..
Procedia CIRP, Nr. 72, (2018)
DOI: 10.1016/j.procir.2018.03.246
https://www.sciencedirect.com/science/article/pii/S2212827118304177 - Das faire Datenblatt – Der heutige Stand und die Zukunft.
6. VDI-Fachtagung Optische Messung von Funktionsflächen 2018. 2. VDI-Fachtagung Multisensorik in der Fertigungsmesstechnik 2018. Frankenthal bei Mannheim, 06. und 07. Juni 2018, (2018)
DOI: 10.51202/9783181023266-81
https://elibrary.vdi-verlag.de/10.51202/9783181023266/optische-messung-von-funktionsflaechen-2018-multisensorik-fertigungsmesstechnik-2018?page=1 - Extensive microstructural quality control inside a machine tool using multiwavelength digital holography.
Speckle 2018: VII International Conference on Speckle Metrology : 10-12 September 2018, Janów Podlaski, Poland [International Conference on Speckle Metrology (7. : 2018 : Janów Podlaski)], (2018)
DOI: 10.1117/12.2319750 - Generating ideal reference geometry for cutting edges.
Journal of Physics: Conference Series, (2018)
DOI: 10.1088/1742-6596/1065/14/142017
http://iopscience.iop.org/article/10.1088/1742-6596/1065/14/142017 - Konzept zur Oberflächenkonditionierung beim kryogenen Hartdrehen [Concept for Targeted Surface Layer Conditioning in Cryogenic Hard Turning].
Zeitschrift für wirtschaftlichen Fabrikbetrieb, (2018)
DOI: 10.3139/104.111951
https://www.degruyter.com/document/doi/10.3139/104.111951/html - Manufacturing of the ISO 25178-70 material measures with direct laser writing: A feasibility study.
Surface Topography: Metrology and Properties, Nr. 6/2, (2018)
DOI: 10.1088/2051-672X/aabe18
https://iopscience.iop.org/article/10.1088/2051-672X/aabe18/meta - Micro-milling of areal material measures - influences on the resulting surface topography..
Procedia CIRP, Nr. 71, (2018)
DOI: 10.1016/j.procir.2018.05.083
https://www.sciencedirect.com/science/article/pii/S221282711830711X - Mobile Sensor Concept for Acoustic Level Estimation in Bulk Solids Silos.
2018 IEEE Sensors Applications Symposium : March 12-14, 2018, Seoul, Korea : 2018 symposium proceedings, (2018)
DOI: 10.1109/SAS.2018.8336760 - Model Selection and Quality Estimation of Time Series Models for Artificial Technical Surface Generation..
Technologies, Nr. 6/1, S. 3. (2018)
DOI: 10.3390/technologies6010003
https://www.mdpi.com/2227-7080/6/1/3 - Modeling of topography measuring instrument transfer functions by time series models.
Measurement Science and Technology, Nr. 29/9, (2018)
DOI: 10.1088/1361-6501/aad467
https://iopscience.iop.org/article/10.1088/1361-6501/aad467/meta - Praxisgerechte Kalibrierung nach ISO 25178-700 - Eine Übersicht.
6. VDI-Fachtagung Optische Messung von Funktionsflächen 2018. 2. VDI-Fachtagung Multisensorik in der Fertigungsmesstechnik 2018. Frankenthal bei Mannheim, 06. und 07. Juni 2018, (2018)
DOI: 10.51202/9783181023266-81
https://elibrary.vdi-verlag.de/10.51202/9783181023266/optische-messung-von-funktionsflaechen-2018-multisensorik-fertigungsmesstechnik-2018?page=1 - System identification and control parameter optimization for a stylus profiler with exchangeable cantilevers.
Engineering Science and Technology, an International Journal, Nr. 2171, (2018)
DOI: 10.1016/j.jestch.2018.02.012
https://www.sciencedirect.com/science/article/pii/S2215098617313216?via%3Dihub - Technical Realisation of Availability-Oriented Business Models for Potato Harvesters by Using aMR Sensors.
IEEE SENSORS 2018 : October 28-31, 2018, Pullman Aerocity, New Delhi, India : 2018 conference proceedings (2018), (2018)
DOI: 10.1109/ICSENS.2018.8630306 - Two-Photon Laser Lithography in Optical Metrology.
Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XI : 28-31 January 2018, San Francisco, California, United States, (2018)
DOI: 10.1117/12.2289900 - Verschleiß von Raunormalen - Experimentelle Untersuchung zum Einfluss der taktilen Abtastung.
wt Werkstattstechnik online, Vol. 108, Nr. 11-12, S. 6. (2018)
DOI: 10.37544/1436-4980-2018-11-12-9
https://elibrary.vdi-verlag.de/10.37544/1436-4980-2018-11-12/wt-werkstattstechnik-online-jahrgang-108-2018-heft-11-12 - Ageing of Roughness Artefacts – Impact on the Measurement Results.
Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology (Euspen) [European Society for Precision Engineering and Nanotechnology. International Conference (17. : 2017 : Hannover)], (2017) - Alternative evaluation methods for roundness measurements.
Engineering for a Changing World: Proceedings; 59th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, September 11-15, 2017. Presented at the Ilmenau Scientific Colloquium, (2017)
https://www.db-thueringen.de/receive/dbt_mods_00033057 - An Approach for the Simulation of Ground and Honed Technical Surfaces for Training Classifiers.
Technologies, Vol. 5, Nr. 4, S. 1. (2017)
DOI: 10.3390/technologies5040066
https://www.mdpi.com/2227-7080/5/4/66 - An Approach to the Assessment of Cam Form.
Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology (Euspen) [European Society for Precision Engineering and Nanotechnology. International Conference (17. : 2017 : Hannover)], (2017)
- Application of GPU-based, Highly Parallelized Algorithms for the Estimation of Electromagnetic Multi-Layer Interactions.
Optical Measurement Systems for Industrial Inspection X : 26-29 June 2017, Munich, Germany [International Symposium on Optical Metrology (2017 : München)], (2017)
DOI: 10.1117/12.2270257 - Calibration of Areal Surface Topography Measuring Instruments.
Fifth International Conference on Optical and Photonics Engineering : 4-7 April 2017, Singapore [International Conference on Optical and Photonics Engineering (2017 : Singapur)], (2017)
DOI: 10.1117/12.2270533 - Dependency Graph Based on User Taxonomy and Related Parameters for More Efficient Collaborative Work.
Applied Mechanics and Materials, Vol. 869, S. 17. (2017)
DOI: 10.4028/www.scientific.net/AMM.869.195
https://www.scientific.net/AMM.869.195 - Description and Evaluation of a Simplified Model to Simulate the Optical Behavior of an Angle-Resolved Scattered Light Sensor.
Journal of Computing and Information Science in Engineering, Vol. 17, Nr. 2, (2017)
DOI: 10.1115/1.4034386
https://asmedigitalcollection.asme.org/computingengineering/article-abstract/17/2/021003/446468/Description-and-Evaluation-of-a-Simplified-Model?redirectedFrom=fulltext - Development of a Sensor Prototype and Geometry Based Parameters for the Characterization of Riblets Using Angle-resolved Measurement Techniques.
Procedia CIRP, Vol. 63, S. 6. (2017)
DOI: 10.1016/j.procir.2017.03.358
https://www.sciencedirect.com/science/article/pii/S221282711730673X?via%3Dihub - Einflüsse der Oberflächenstruktur auf die Streuung von Rauheitskennwerten: Praxisrelevante Untersuchungen.
XIV. Internationales Oberflächenkolloquium : 30.01.-01.02.2017 an der Technischen Universität Chemnitz : Tagungsband = XIV. International Colloquium on Surfaces [Internationales Oberflächenkolloquium (14. : 2017 : Chemnitz)], (2017) - Experimental Analysis for the Use of Sodium Dodecyl Sulfate as a Soluble Metal Cutting Fluid for Micromachining with Electroless-Plated Micropencil Grinding Tools.
Inventions, Vol. 2, Nr. 4, (2017)
DOI: 10.3390/inventions2040029
https://www.mdpi.com/2411-5134/2/4/29 - Fundamental Analysis of the Usability of an Angle-Resolved Scattered Light Sensor for Monitoring Vibratory Finishing Processes Based on Ray Tracing Simulations.
Applied Mechanics and Materials, Vol. 869, S. 13. (2017)
DOI: 10.4028/www.scientific.net/AMM.869.115
https://www.scientific.net/AMM.869.115 - Grinding Energy Modeling Based on Friction, Plowing, and Shearing.
Journal of Manufacturing Science and Engineering, S. 11. (2017)
DOI: 10.1115/1.4037239
https://asmedigitalcollection.asme.org/manufacturingscience/article-abstract/139/12/121009/473150/Grinding-Energy-Modeling-Based-on-Friction-Plowing?redirectedFrom=fulltext - Influence of surface morphology on fatigue behavior of metastable austenitic stainless steel AISI 347 at ambient temperature and 300°C.
Procedia Structural Integrity, S. 8. (2017)
DOI: 10.1016/j.prostr.2017.07.150
https://www.sciencedirect.com/science/article/pii/S2452321617302627?via%3Dihub - Ultrafast 3D High Precision Print of Micro Structures for Optical Instrument Calibration Procedures.
Additive Manufacturing, Vol. 18, S. 9. (2017)
DOI: 10.1016/j.addma.2017.09.001
https://www.sciencedirect.com/science/article/pii/S221486041630344X?via%3Dihub - A Model-Based Approach for the Calibration and Traceability of the Angle Resolved Scattering Light Sensor.
Surface Topography: Metrology and Properties, Vol. 4, Nr. 2, (2016)
DOI: 10.1088/2051-672X/4/2/024010
https://iopscience.iop.org/article/10.1088/2051-672X/4/2/024010 - Design and Verification of Geometric Roughness Standards by Reverse Engineering.
Procedia CIRP, Vol. 45, S. 4. (2016)
DOI: 10.1016/j.procir.2016.02.157
https://www.sciencedirect.com/science/article/pii/S2212827116004418?via%3Dihub - Ein mobiles zur Mikrodrallmessung geeignetes Messsystem und dessen Kalibrierung [A mobile measuring system and its calibration suited for micro lead measurements].
Technisches Messen, S. 10. (2016)
DOI: 10.1515/teme-2015-0127
https://www.degruyter.com/document/doi/10.1515/teme-2015-0127/html - Form error assessment of circular-arc cams.
Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology (Euspen), (2016) - Manufacturing of new roughness standards for the linearity of the vertical axis – Feasibility study and optimization.
Engineering Science and Technology, an International Journal, Vol. 19, Nr. 4, S. 9. (2016)
DOI: 10.1016/j.jestch.2016.06.009
https://www.sciencedirect.com/science/article/pii/S2215098616301628?via%3Dihub - Neue Anwendungen – Rauheitsmessung mit Computertomographie.
Qualität und Zuverlässigkeit, Vol. 61, Nr. 1, S. 4. (2016)
https://www.qz-online.de/a/fachartikel/neue-anwendungen-290901 - Procedure to Approximately Estimate the Uncertainty of Material Ratio Parameters Due to Inhomogeneity of Surface Roughness.
Measurement Science and Technology, Vol. 27, Nr. 8, (2016)
DOI: 10.1088/0957-0233/27/8/085005
https://iopscience.iop.org/article/10.1088/0957-0233/27/8/085005 - Ti surface modification by cold spraying with TiO2 microparticles.
Surface and Coatings Technology, S. 10. (2016)
DOI: 10.1016/j.surfcoat.2016.10.091
https://www.sciencedirect.com/science/article/pii/S025789721631088X?via%3Dihub - Unsicherheit von Rauheitskennwerten in der Praxis – Untersuchung der Statistik der Oberfläche auf Zylinderlaufbahnen.
wt Werkstattstechnik online, Vol. 106, Nr. 11-12, S. 7. (2016)
DOI: 10.37544/1436-4980-2016-11-12-45
https://elibrary.vdi-verlag.de/10.37544/1436-4980-2016-11-12/wt-werkstattstechnik-online-jahrgang-106-2016-heft-11-12?page=1 - Calibration of Ellipso-Height-Topometry with Nanoscale Gratings of Varying Materials.
Optik, Vol. 126, Nr. 23, S. 6. (2015)
DOI: 10.1016/j.ijleo.2015.08.093
https://www.sciencedirect.com/science/article/pii/S0030402615008542?via%3Dihub - Calibration of Z-Axis Linearity for Arbitrary Optical Topography Measuring Instruments.
Optical Measurement Systems for Industrial Inspection IX : 22-25 June 2015, Munich, German, (2015)
DOI: 10.1117/12.2190737 - Contamination of Roughness Artefacts – Impact on the Measurement Results.
Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology (Euspen) [European Society for Precision Engineering and Nanotechnology. International Conference & Exhibition (15. : 2015 : Leuven)], (2015)
https://www.euspen.eu/knowledge-base/ICE15-O3.9.pdf
https://www.euspen.eu/product/15th-international-conference-proceedings/ - High-Voltage DC Trailing Cable Systems for Mobile Machinery.
IECON 2015 - Yokohama : 41st Annual Conference of the IEEE Industrial Electronics Society : November 9-12, 2015, Pacifico Yokohama, Yokohama, Japan, (2015)
DOI: 10.1109/IECON.2015.7392254 - Modellbasierte Entwicklung eines Geometrienormals für pneumatische Abstandssensoren.
Technisches Messen, Vol. 82, Nr. 2, S. 9. (2015)
DOI: 10.1515/teme-2014-0013
https://www.degruyter.com/document/doi/10.1515/teme-2014-0013/html - Nahe an Der Anwendung – Geometrienormale Zur Kalibrierung von Tastschnittgeräten.
Qualität und Zuverlässigkeit, Vol. 60, Nr. 3, S. 3. (2015)
https://www.qz-online.de/a/fachartikel/nahe-an-der-anwendung-293794 - Nanomechanical Properties of the Sea-Water Bacterium Paracoccus Seriniphilus A Scanning Force Microscopy Approach.
Biointerphases, Vol. 10, Nr. 1, (2015)
DOI: 10.1116/1.4906862
https://pubs.aip.org/avs/bip/article/10/1/019004/124465/Nanomechanical-properties-of-the-sea-water - A Strategy for Micro-Twist Characterization on the Shaft in a Rotary Shaft Sealing System.
International sealing conference: Innovative sealing technology - static and dynamic = Internationale Dichtungstagung [International Sealing Conference (18. : 2014 : Stuttgart)], (2014) - Design of a Chromatic Fringe Projector for 3D Object Reconstruction.
Fringe 2013 : 7th International Workshop on Advanced Optical Imaging and Metrology, (2014)
DOI: 10.1007/978-3-642-36359-7_37
https://link.springer.com/chapter/10.1007/978-3-642-36359-7_37 - Entwicklung eines Geometrienormals zur Kalibrierung von pneumatischen Abstandssensoren.
AHMT 2014 - Symposium des Arbeitskreises der Hochschullehrer für Messtechnik, (2014)
DOI: 10.5162/AHMT2014/1.3 - Evolution of Wear on the Abrasive Tool during the Polishing of Porcelain Tile Using Morphological Space.
Advanced Materials Research, Vol. 906, S. 10. (2014)
DOI: 10.4028/www.scientific.net/AMR.906.293
https://www.scientific.net/AMR.906.293 - Kinematische Simulation gedrehter Wellenlaufflächen – Funktionsorientierte Untersuchung des Einflusses der Prozessparameter auf Drallstrukturen.
wt Werkstattstechnik online, Vol. 104, Nr. 5, S. 9. (2014)
DOI: 10.37544/1436-4980-2014-5-279
https://elibrary.vdi-verlag.de/10.37544/1436-4980-2014-5/wt-werkstattstechnik-online-jahrgang-104-2014-heft-5?page=1 - Stabilisierung von Rauheitskennwerten durch Ausblenden von Stördaten.
MTZ : Motortechnische Zeitschrift, Vol. 75, Nr. 4, S. 6. (2014)
DOI: 10.1007/s35146-014-0317-5
https://link.springer.com/article/10.1007/s35146-014-0317-5 - Unambiguous Evaluation of a Chirp Measurement Standard.
Surface Topography: Metrology and Properties, Vol. 2, Nr. 4, (2014)
DOI: 10.1088/2051-672X/2/4/045003
https://iopscience.iop.org/article/10.1088/2051-672X/2/4/045003 - Vergleichbare Ergebnisse – Rauheitsmessung Taktil Oder Optisch?.
Qualität und Zuverlässigkeit, Vol. 59, Nr. 5, S. 3. (2014) - Aktive Schwingungsdämpfung eines Weißlichtinterferometers.
Technisches Messen, Vol. 80, Nr. 1, S. 5. (2013)
DOI: 10.1524/teme.2013.0003
https://www.degruyter.com/document/doi/10.1524/teme.2013.0003/html - Application of Ordinary Kriging for Interpolation of Micro-Structured Technical Surfaces.
Measurement Science and Technology, Vol. 24, Nr. 9, S. 1. (2013)
DOI: 10.1088/0957-0233/24/9/095201
https://iopscience.iop.org/article/10.1088/0957-0233/24/9/095201 - Areal Filtering Methods.
Characterisation of Areal Surface Texture, (2013)
DOI: 10.1007/978-3-642-36458-7_4 - Filtration of Surface Measurement Data.
Encyclopedia of Tribology, (2013)
DOI: 10.1007/978-0-387-92897-5_301 - Influence of Kinematics and Abrasive Configuration on the Grinding Process of Glass.
Journal of Materials Processing Technology, Vol. 213, Nr. 5, S. 12. (2013)
DOI: 10.1016/j.jmatprotec.2012.11.026
https://www.sciencedirect.com/science/article/pii/S0924013612003512?via%3Dihub - Novel Parameters to Assess Feature Size on Functional Surfaces.
Surface Topography: Metrology and Properties, Vol. 1, Nr. 1, (2013)
DOI: 10.1088/2051-672X/1/1/015004
https://iopscience.iop.org/article/10.1088/2051-672X/1/1/015004 - Periodic Gaussian Filter According to ISO 16610-21 for Closed Profiles.
Precision Engineering, Vol. 38, Nr. 2, S. 4. (2013)
DOI: 10.1016/j.precisioneng.2013.09.004
https://www.sciencedirect.com/science/article/pii/S0141635913001499?via%3Dihub - Pneumatische Abstandsmessung – Mathematische Beschreibung von Dynamik Und Übertragungsverhalten.
wt Werkstattstechnik online, Vol. 103, Nr. 11-12, S. 7. (2013)
DOI: 10.37544/1436-4980-2013-11-12-904
https://elibrary.vdi-verlag.de/10.37544/1436-4980-2013-11-12/wt-werkstattstechnik-online-jahrgang-103-2013-heft-11-12?page=1 - Qualitätsschutz von Investitionsgütern Verfahren zur Unikatsidentifizierung anhand inhärenter Bauteilmerkmale.
wt Werkstattstechnik online, S. 5. (2013)
DOI: 10.37544/1436-4980-2013-7-8-600
https://elibrary.vdi-verlag.de/10.37544/1436-4980-2013-7-8-600/qualitaetsschutz-von-investitionsguetern-jahrgang-103-2013-heft-7-8?page=1 - Robust Evaluation of Intensity Curves Measured by Confocal Microscopies.
Optical measurement systems for industrial inspection VIII : 13 - 16 May 2013, Munich, Germany ; [part of SPIE optical metrology], (2013)
DOI: 10.1117/12.2020551 - Topografiebeurteilung von Zylinderlaufbahnen.
MTZ : Motortechnische Zeitschrift, Vol. 74, Nr. 4, S. 6. (2013)
DOI: 10.1007/s35146-013-0077-7
https://link.springer.com/article/10.1007/s35146-013-0077-7 - Anwendung von Filtern nach ISO 16610 an unterbrochenen Oberflächenprofilen.
Tagungsband / XIII. Internationales Oberflächenkolloquium, 1. Treffen "Industry Meets Standardization and Science" - IMSAS : 12. - 14. März 2012 an der Technischen Universität Chemnitz [Internationales Oberflächenkolloquium (13 : 2012 : Chemnitz)], (2012) - Scattered Light Sensor for Chatter Mark Detection in Nanometer Scale.
International Journal of Nanomanufacturing, Vol. 8, Nr. 5/6, S. 1. (2012)
DOI: 10.1504/IJNM.2012.051106
https://www.inderscienceonline.com/doi/abs/10.1504/IJNM.2012.051106 - 3D-Kenngrößen nach ISO 25178.
Fortschritte in der Metallographie : Vortragstexte der 45. Metallographie-Tagung, 14.-16. September 2011 in Karlsruhe, (2011)
DOI: 10.14463/KXP:1698167873 - Charakterisierung technischer Bauteiloberflächen - Stand der Oberflächenmesstechnik heute.
Messprinzipien - Messgeräte - Anwendungen / 4. Fachtagung Metrologie in der Mikro- und Nanotechnik 2011, Erlangen, 25. und 26. Oktober 2011. VDI, VDE, Mess- und Automatisierungstechnik, (2011) - Light Scattering Methods.
Optical Measurement of Surface Topography, (2011)
DOI: 10.1007/978-3-642-12012-1_12 - Uncertainty of Height Information in Coherence Scanning Interferometry.
Optical measurement systems for industrial inspection VII : 23 - 26 May 2011, Munich, Germany ; [part of SPIE optical metrology], (2011)
DOI: 10.1117/12.889796 - Unsicherheitsbetrachtungen zur Formmessung an optischen Bauelementen auf der Basis von Bayes.
Messunsicherheit praxisgerecht bestimmen : Erfurt, 8. und 9. November 2011 / [Fachtagung "Messunsicherheit Praxisgerecht Bestimmen"]. VDI/VDE, Mess- und Automatisierungstechnik, (2011) - Vergleichende Untersuchung optischer Oberflächenmessgeräte mit einem Chirp-Kalibriernormal.
Technisches Messen, Vol. 78, Nr. 10, S. 6. (2011)
DOI: 10.1524/teme.2011.0146
https://www.degruyter.com/document/doi/10.1524/teme.2011.0146/html - Von der Linie zur Fläche, winkelauflösende Streulichtmesstechnik.
Messprinzipien - Messgeräte - Anwendungen / 4. Fachtagung Metrologie in der Mikro- und Nanotechnik 2011, Erlangen, 25. und 26. Oktober 2011. VDI, VDE, Mess- und Automatisierungstechnik, (2011) - Winkelauflösende Streulichtmesstechnik zur robusten In-Line Messung der Mikrogeometrie auf Zahnflanken - Winkelauflösende Streulichtmesstechnik zur Form- und Rauheitsmessung.
4. Fachtagung Verzahnungsmesstechnik 2011 : Leonberg bei Stuttgart, 21. und 22. September 2011 / VDI-VDE-Mess- und Automatisierungstechnik, (2011) - 2nd Generation Lead Measurement.
Fundamental and applied metrology : IMEKO XIX world congress, September 6 - 11, 2009, Lisbon, Portugal ; proceedings, (2009) - Assistance System for Optical Sensors.
Modeling aspects in optical metrology II : 15 - 16 June 2009, Munich, Germany, (2009)
DOI: 10.1117/12.827339 - Extraction of Shape and Roughness Using Scattering Light.
Optical measurement systems for industrial inspection VI : 15 - 18 June 2009, Munich, Germany, (2009)
DOI: 10.1117/12.827478 - Gaussian Regression Filters.
Computational Surface and Roundness Metrology, (2009)
DOI: 10.1007/978-1-84800-297-5_9 - Multisensor Data Fusion in Dimensional Metrology.
CIRP Annals, Vol. 58, Nr. 2, S. 21. (2009)
DOI: 10.1016/j.cirp.2009.09.008
https://www.sciencedirect.com/science/article/pii/S0007850609001759?via%3Dihub - Reconstruction of Shape Using Gradient Measuring Optical Systems.
Fringe 2009 [International Workshop on Advanced Optical Metrology (6 : 2009 : Stuttgart)], (2009)
DOI: 10.1007/978-3-642-03051-2_65 - Comparison of Classic and Robust Gauss Filtering for the Determination of Waviness of Non-Isotropic Surfaces.
Proceedings / XII. International Colloquium on Surfaces : January 28th and 29th, 2008, Chemnitz, Germany = XII. Internationales Oberflächenkolloquium [Internationales Oberflächenkolloquium (12 : 2008 : Chemnitz)], (2008) - Lead Characterisation by an Objective Evaluation Method.
Wear, Vol. 266, Nr. 5-6, S. 4. (2008)
DOI: 10.1016/j.wear.2008.04.080
https://www.sciencedirect.com/science/article/pii/S0043164808003025?via%3Dihub - Optical High Speed Twist Characterisation.
Proceedings / XII. International Colloquium on Surfaces : January 28th and 29th, 2008, Chemnitz, Germany = XII. Internationales Oberflächenkolloquium [Internationales Oberflächenkolloquium (12 : 2008 : Chemnitz)], (2008) - Self-Assembled Ge/Si Islands as Novel Nano-Roughness Standards for Scanning Force Microscopy.
Proceedings / XII. International Colloquium on Surfaces : January 28th and 29th, 2008, Chemnitz, Germany = XII. Internationales Oberflächenkolloquium [Internationales Oberflächenkolloquium (12 : 2008 : Chemnitz)], (2008)