Lehrstuhl für Fertigungstechnik und Betriebsorganisation (FBK)

Dipl.-Ing. Martin Bohley

Gebäude 42, Raum 480

Telefon: +49 631 205 3472
Telefax: +49 631 205 3238
E-Mail: martin.bohley(at)mv.uni-kl.de

  • seit März 2013 Wissenschaftlicher Mitarbeiter am FBK
  • Forschungsschwerpunkt: Mikrozerspanung

 

Veröffentlichungen

 

Bücher/Buchbeiträge

J.C. Aurich, I.G. Reichenbach, M. Bohley: Ultra-small Micro End Mills. CIRP Encyclopedia of Production Engineering (2014): S. 1280-1286.

 

 

Zeitschriftenbeiträge

I.G. Reichenbach, M. Bohley, F.J.P. Sousa, J.C. Aurich: Tool-life criteria and wear behavior of single-edge ultra-small micro end mills. Precision Engineering 55 (2019): S. 48-58.

K. Huttenlochner, N. Davoudi, C. Schlegel, M. Bohley, C. Müller-Renno, J.C. Aurich, R. Ulber, C. Ziegler: Paracoccus seriniphilus adhered on surfaces: Resistance of a seawater bacterium against shear forces under the influence of roughness, surface energy, and zeta potential of the surfaces. Biointerphases 13/5 (2018): [doi:10.1116/1.5049226]

M. Bohley, I.G. Reichenbach, S. Kieren-Ehses, L. Heberger, P.A. Arrabiyeh, R. Merz, L. Böhme, J. Hering, B. Kirsch, M. Kopnarski, E. Kerscher, G.v. Freymann, J.C. Aurich: Coating of Ultra-Small Micro End Mills: Analysis of Performance and Suitability of Eight Different Hard-Coatings. Journal of Manufacturing and Materials Processing 2/2 (2018): [DOI:10.3390/jmmp2020022]

I.G. Reichenbach, M. Bohley, F.J.P. Sousa; J.C. Aurich: Micromachining of PMMA - manufacturing of burr-free structures with single-edge ultra-small micro end mills. International Journal of Advanced Manufacturing Technology 96/9-12 (2018): S. 3665-3677.

J.C. Aurich, M. Bohley, F. Schneider, B. Kirsch: Einfluss der Hartmetallspezifikation bei der Mikrofräsbearbeitung. Maschinenbau 10 (2017): S.14-17.

P.A. Arrabiyeh, M. Bohley, F. Ströer, B. Kirsch, J. Seewig, J.C. Aurich: Experimental Analysis for the Use of Sodium Dodecyl Sulfate as a Soluble Metal Cutting Fluid for Mircomachining with Electroless-Plated Micropencil Grinding Tools. Inventions 2/4 (2017): [doi:10.3390/inventions2040029]

N. Davoudi, K. Huttenlochner, J. Chodorski, C. Schlegel, M. Bohley, C. Müller-Renno, J.C. Aurich, R. Ulber, C. Ziegler: Adhesion forces of the sea-water bacterium Paracoccus seriniphilus on titanium: Influence of microstructures and environmental conditions. Biointerphases 12/5 (2017): S. 05G606-1-05G606-12.

M. Bohley, S. Kieren-Ehses, B. Kirsch, J.C. Aurich: Die gesamte Prozesskette der Mikrofräsbearbeitung. Mav - Innovation in der spanenden Fertigung 11 (2017): S. 18-21.

M. Bohley, L. Heberger, B. Kirsch, J.C. Aurich: Untersuchung des Verschleißverhaltens von TiB2-beschichteten Mikrofräswerkzeugen. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb 9 (2017): S. 598-601.

J.C. Aurich, C. Müller, M. Bohley, P.A. Arrabiyeh, B. Kirsch: Recent Developments in Desktop-Sized Machine Tools. Solid State Phenomena 261 (2017): S. 425-431.

B. Kirsch, M. Bohley, P.A. Arrabiyeh, J.C. Aurich: Application of Ultra-Small Micro Grinding and Micro Milling Tools: Possibilities and Limitations. Micromachines 8/9 (2017): S. 261-279.

C. Schlegel, J. Chodorski, M. Huster, N. Davoudi, K. Huttenlochner, M. Bohley, I. Reichenbach, S. Buhl, P. Breuninger, C. Müller-Renno, C. Ziegler, J.C. Aurich, S. Antonyuk, R. Ulber: Analyzing the Influence of Microstructured Surfaces on the Lactic Acid Production of Lactobacillus delbrueckii lactis in a flow-through cell system. Engineering in Life Sciences (2017): S. 865-873.

J.C. Aurich, M. Bohley, I.G. Reichenbach, B. Kirsch: Surface quality in micro milling: Influences of spindle and cutting parameters. CIRP Annals - Manufacturing Technology 66/1 (2017): S. 101-104.

J.C. Aurich, M. Bohley, F. Schneider, B. Kirsch: Hartmetallwerkzeuge für die Mikrobearbeitung - Einflussgrößen auf das Bearbeitungsergebnis. Pulvermetallurgie in Wissenschaft und Praxis 32-35. Hagener Symposium - Zerspanung von und mit pullvermetallurgischen Werkstoffen (2016): S. 231-254. 

M. Bohley, I.G. Reichenbach, C. Müller, J.C. Aurich: Development of a desktop machine tool for integrated ultra-small micro end mill production and application. Proceedings of the 11th International Conference on Micro Manufacturing Paper 13 (2016). 

C. Godard, M. Bohley, J.C. Aurich, E. Kerscher: Deformation behaviour of micro-milled cp-titanium specimens under tensile loading. International Journal of Materials Research 106/6 (2015): S. 572-579.

M. Fingerle, O. Köhler, C. Rösch, F. Kratz, C. Scheibe, N. Davoudi, C. Müller-Renno, C. Ziegler, M. Huster, C. Schlegel, R. Ulber, M. Bohley, J.C. Aurich: Cleaning of titanium substrates after application in a bioreactor. Biointerphases 10/1 (2015): S. 019007-1-019007-8. 

M. Bohley, R. Merz, C. Müller-Renno, I.G. Reichenbach, N. Davoudi, C. Ziegler, M. Kopnarski, J.C. Aurich: Werkzeug-Werkstück-Interaktion beim Mikrofräsen - Charakterisierung des Wirkpaarverhaltens anhand von Spanbildungs- und Oberflächenuntersuchungen. wt Werkstattstechnik online 104/9 (2014): S. 586-591.

 

 

Konferenzbeiträge

M. Bohley, S. Kieren-Ehses, L. Heberger, B. Kirsch, J.C. Aurich: Size limitations and wear behavior of TiB2 coated micro end mills (Ø < 50 µm) when machining cp-titanium. Procedia CIRP 71 - Proceedings of the 4th CIRP Conference on Surface Integrity (2018): S. 187-191.

S. Kieren-Ehses, M. Bohley, P. Arrabiyeh, B. Kirsch, J.C. Aurich: Influence of different metal working fluids when micro machining cp-titanium with 50 µm diameter micro end mills. Procedia CIRP 71 - Proceedings of the 4th CIRP Conference on Surface Integrity (2018): S. 198-202.

C. Müller, M. Bohley, B. Kirsch, J.C. Aurich: A novel rotational air bearing axis for the manufacturing of ultra-small micro end mills. Proceedings of the 17th euspen International Conference (2017): S. 144-145.

M. Bohley, C. Müller, B. Kirsch, J.C. Aurich: Integration of a confocal microscope in a desktop machine tool for in situ process control. Proceedings of the 17th euspen International Conference (2017): S. 122-123.

J.C. Aurich, M. Bohley, F. Schneider, B. Kirsch: Hartmetallwerkzeuge für die Mikrobearbeitung - Einflussgrößen auf das Bearbeitungsergebnis. Pulvermetallurgie in Wissenschaft und Praxis 32-35. Hagener Symposium - Zerspanung von und mit pullvermetallurgischen Werkstoffen (2016): S. 231-254. 

C. Müller, M. Bohley, I.G. Reichenbach, J.C. Aurich: In Situ Topology Measurement of Micro Structured Surfaces with a Confocal Chromatic Sensor on a Desktop Sized Machine Tool. Advanced Materials Research 1140 - Proceedings of the WGP Congress 2016 - Progress in Production Engineering (2016): S. 392-399. 

P. A. Arrabiyeh, V. Raval, B. Kirsch, M. Bohley, J. C. Aurich: Electroless Plating of Micro Pencil Grinding Tools with 5-10 µm sized cBN Grits. Advanced Materials Research 1140 – Proceedings of the WGP Congress 2016 – Progress in Production Engineering (2016): S. 133-140.

M. Bohley, I.G. Reichenbach, C. Müller, B. Kirsch, J.C. Aurich: Compact hydrodynamic spindle module for micromachining applications. 16th international conference of the European Society for Precision Engineering and Nanotechnology (2016). 

M. Bohley, I.G. Reichenbach, C. Müller, J.C. Aurich: Development of a desktop machine tool for integrated ultra-small micro end mill production and application. Proceedings of the 11th International Conference on Micro Manufacturing Paper 13 (2016). 

M. Eifler, F. Schneider, M. Bohley, J.C. Aurich, J. Seewig: Contamination of roughness artefacts - impacts on the measurement result. 15th international conference of the European Society for Precision Engineering and Nanotechnology (2015): S. 119-120.

C. Müller, M. Bohley, J.C. Aurich: Air bearings for compact micro machining spindles. 15th international conference of the European Society for Precision Engineering and Nanotechnology (2015): S. 225-226.

C. Müller, M. Bohley, F. Schneider, J.C. Aurich: Servo tool for chip formation studies in micro milling. 15th international conference of the European Society for Precision Engineering and Nanotechnology (2015): S. 307-308.

I.G. Reichenbach, M. Bohley, J.C. Aurich: TiAIN coated ultra-small micro end mills. Proceedings of the 15th international conference of the European Society for Precision Engineering and Nanotechnology (2015): S. 321-322.

F. Schneider, M. Bohley, R. Lohkamp, F.J.P. Sousa, R. Müller, J.C. Aurich: Development of a Quick-Stop-Device to investigate chip formation in micro- and nanomachining. 14th International Conference of the European Society for Precision Engineering & Nanotechnology 2 (2014): S. 91-94.

M. Walk, M. Bohley, J.C. Aurich: A new workpiece clamping method for micro-machining applications based on van der Waal forces. 14th International Conference of the European Society for Precision Engineering & Nanotechnology 2 (2014): S.335-338.

I.G. Reichenbach, M. Bohley: Micromachining of cp-Titanium on a desktop machine - Study on bottom surface quality in micro end milling. Advanced Materials Research 769 - Proceedings of the WGP Congress 2013 - Progress in Production Engineering (2013): S. 53-60.

Zum Seitenanfang