Institute of Materials Science and Engineering

Publications

Publications 2024

Interaction and superposition of creep damage and high-cycle fatigue of coarse-grained nickel-base alloy 247 Oliver Jordan, Tuan Duc Nguyen, Philipp Lion, Tilmann Beck

https://doi.org/10.1080/09603409.2024.2310914

Investigating very high cycle fatigue (VHCF) behavior of AISI 347 and 304L including their welds for reactor internals at ambient and operating relevant temperature G. Veile, E. Regitz, J. Rudolph, T. Schopf, M. Smaga, U. Fischer, M. Grimm, M. Patzer, S. Weihe, T. Beck

DOI

Control concept for the regulation of the surface layer properties using consecutive cuts in cryogenic hard turning of AISI 52100. Felix Grossmann, Viktor Follmann, Tong Zhu, Julian Uebel, Stefan Wolke, Benjamin Kirsch, Marek Smaga, Jörg Seewig, Tilmann Beck, Jan C. Aurich 

https://doi.org/10.1007/s11740-023-01259-7

Publications 2023

Influence of Manufacturing and Load Conditions on the Phase Transformation and Fatigue of Austenitic Stainless Steels,Component Surfaces: Manufacturing-Morphology-Property Relationships Tilmann Beck, Marek Smaga, Sergiy Antonyuk, Dietmar Eifler, Ralf Müller, Urbassek, Herbert M, Tong Zhu.

https://doi.org/10.1007/978-3-031-35575-2_11

Plasticity in cyclic indentation of a Cu-Zr-based bulk metallic glass after tensile loading: An experimental and molecular dynamics simulation study Avila, Karina E; Vardanyan, Vardan Hoviki; Zhu, Tong; Küchemann, Stefan; Smaga, Marek; Urbassek, Herbert M.

https://doi.org/10.1016/j.jnoncrysol.2023.122486

Einflüsse unterschiedlicher Randschichtmorphologien auf die Ermüdungsfestigkeit von PBF-LB gefertigtem AlSi10Mg. P. Lehner, B. Blinn, T. Beck. 

https://doi.org/0.48447/ADD-2023-BB

Improving the Defect Tolerance and Fatigue Strength of AM AlSi10Mg. P. Lehner, B. Blinn, T. Beck

https://doi.org/10.1002/adem.202201855

Influence of Surface Morphology on Fatigue and Tribological Behavior of TRIP/TWIP Steels. Marek Smaga, Tilmann Beck, Michael Kopnarski, Rolf Merz, Kristin M. de Payrebrune und Stefan Wolke 

https://doi.org/10.1007/978-3-031-35575-2_12

Relation Between Interface Geometry and Tensile Shear Strength of Ultrasonically Welded Joints. Sophie Arweiler-Böllert, Moritz Liesegang, Tilmann Beck,   Julia Jungbluth & Sebastian Schmeer

https://doi.org/10.1007/s11665-023-08325-2

Investigation of the tensile deformation behaviour in Ni-based superalloy inconel alloy 617 using EBSD-based finite element simulations and optical flow method. M. Liesegang, P. Lion, T. Beck, M. Gräf & G. Steidl

https://doi.org/10.1007/s10853-023-08558-5

Short-Time Creep Deformation of the Coarse-Grained Nickel-Base Alloy 247 and Its Implications on the High-Cycle Fatigue Behavior  Oliver Jordan, Philipp Lion, Tilmann Beck

 https://doi.org/10.1115/1.4056309 

Influence of the Inherited Structure Induced by Al and Si Alloying on Microstructure Evolution and Mechanical Properties of 100Cr6 Steels Tarek Allam,    Pascal Ostermayer, Bastian Blinn, Tilmann Beck, Wolfgang Bleck

https://doi.org/10.1002/srin.202200804

Numerical modelling of stress-strain response and deformation-induced martensite in metastable austenitic stainless steels under monotonic tensile loading  Hari Kisan Thammineni, Tong Zhu, Marek Smaga, Tilmann Beck, Ralf Müller

https://doi.org/10.1002/pamm.202200312

Publications 2022

Short-Time Creep Deformation of the Coarse-Grained Nickel-Base Alloy 247 and Its Implications On the High-Cycle Fatigue Behavior Oliver Jordan, Philipp Lion, Tilmann Beck

Journal of Engineering for Gas Turbines and Power : https://doi.org/10.1115/1.4056309

Conference: ASME Turbo Expo 2022: Turbomachinery Technical: https://doi.org/10.1115/GT2022-81676

Very high cycle fatigue (VHCF) behavior of austenitic stainless steels and their welds for reactor internals at ambient and operating relevant temperature M. Smaga, T. Daniel, E. Regitz, T. Beck, T. Schopf, G. Veile, S. Weihe, J. Rudolph, U. Fischer

DOI

A New Approach to Estimate the Fatigue Limit of Steels Based on Conventional and Cyclic Indentation Testing David Görzen, Pascal Ostermayer, Patrick Lehner, Bastian Blinn, Dietmar Eifler, Tilmann Beck

https://doi.org/10.3390/met12071066

Evaluation of the plastic deformation behavior of modified 100Cr6 steels with increased fractions of retained austenite using cyclic indentation tests  Pascal Ostermayer, Klaus Burkart, Bastian Blinn, Holger Surm, Brigitte Clausen und Tilmann Beck 

https://doi.org/10.1515/mt-2022-0087

Nano-sized Cu precipitation and microstructural evolution in aged ultralow and medium carbon steels X. Shen, D. Görzen, Z. Xu, B. Blinn, W. Bleck, T. Beck, U. Krupp, W. Song 

https://doi.org/10.1016/j.mtla.2022.101626

Publications 2021

Analysis of the Subsurface Volume of Differently Finished AISI 52100 by Cyclic Indentation and X-Ray Diffraction  Pascal Ostermayer, Werner Ankener, Bastian Blinn, Marek Smaga, Dietmar Eifler, Tilmann Beck

 https://doi.org/10.1002/srin.202100253

 

Process-influenced fatigue behavior of AISI 316L manufactured by powder- and wire-based Laser Direct Energy Deposition B. Blinn, P. Lion, O. Jordan, S. Meiniger, S. Mischliwski b, C. Tepper b, C. Gläßner, J.C. Aurich, M. Weigold, T. Beck

https://doi.org/10.1016/j.msea.2021.141383

 

Influence of microstructural defects and the surface topography on the fatigue behavior of “additively-subtractively” manufactured specimens made of AISI 316L B. Blinn, S. Greco, M. Smaga, M. Zimmermann, H. Hotz, D. Müller, J. Hartig, B. Kirsch, J.C. Aurich, T. Beck

https://doi.org/10.1002/mawe.202000266

 

Analyzing the influence of a deep cryogenic treatment on the mechanical properties of blanking tools by using the short-time method PhyBaLCHT  B.Blinn, S. Winter, M. Weber, M. Demmler, V. Kräusel, T. Beck

https://doi.org/10.1016/j.msea.2021.141846

 

Analysis of Hydrogen-Induced Changes in the Cyclic Deformation Behavior of AISI 300–Series Austenitic Stainless Steels Using Cyclic Indentation Testing Sven Brück, Bastian Blinn, Katharina Diehl, Yannick Wissing, Julian Müller, Martina Schwarz, Hans-Jürgen Christ, Tilmann Beck, Thorsten Staedler, Xin Jiang, Benjamin Butz and Stefan Weihe

https://doi.org/10.3390/met11060923

 

Investigating the Influence of Process Parameters on the Mechanical Properties of Extruded Aluminum Tubes by Cyclic Indentation Tests  David Görzen, Florian Patrick Schäfke, Bastian Blinn, Christian Klose, Hans Jürgen Maier, Tilmann Beck

https://doi.org/10.3390/met11050744

Go to top