Juniorprofessur Angewandte Strukturmechanik (ASM)

Veröffentlichungen

Journal Veröffentlichungen und Buchbeiträge (peer-reviewed)

2018

Falke, T.; de Payrebrune, K.M.; Kirchhof, S.; Kühnel, L.; Kühnel, R.; Mütze, T.; Kröger, M.: An alternative DEM parameter identification procedure based on experimental investigation: A case study of a ring shear cell, Powder Technology, 328, pp. 227-234 (2018)

2017

de Payrebrune, K.M.; O'Reilly, O.M.: On the Development of Rod-Based Models for Pneumatically Actuated Soft Robot Actuators: Insights from Finite Element Models and Experimental Testing, International Journal of Mechanical Sciences, Vol 120C, pp. 226-235 (2017)

de Payrebrune, K.M.; Kröger, M.: Effects of the Grinding Wheel Eccentricity and Waviness on the Dynamics of Tool Grinding, Applied Mechanics and Materials, Vol 869, pp. 128-138 (2017)

 

de Payrebrune, K.M.; Kröger, M.: Reduced models of grinding wheel topography and material removal to simulate dynamical aspects in grinding. International Journal of Advanced Manufacturing Technology, Springer, pp. 1-11 88 (1-4), 33-43 (2017)

2016

de Payrebrune, K.M.; Kröger, M.: An integrated model of tool grinding: challenges, chances and limits of predicting process dynamics. Production Engineering, 10, Nr. 4-5, pp. 421-432 (2016)

 

de Payrebrune, K.M.; O’Reilly, O.M.: On Constitutive Relations for a Rod-Based Model of a Pneu-Net Bending Actuator. Extreme Mechanics Letters, (2016), (online)

2015

de Payrebrune, K.M.; Kröger, M.: Dynamical aspects in modeling long cantilevering workpieces in tool grinding, Journal of Sound and Vibration, 355, pp. 407-417, (2015)

 

de Payrebrune, K.M.; Kröger, M.: Kinematic Analysis of Particles in Three-Body Contact. Tribology International 81, pp. 240-247, (2015)

2013

de Payrebrune, K.M.: Analyse und Modellierung der Prozess-Strukturwechselwirkungen beim Werkzeugschleifen. Dissertation, TU Bergakademie Freiberg, Fortschritt-Berichte, VDI Reihe 11, Nr. 349, (2013)

 

Deichmüller, M.; Denkena, B.; de Payrebrune, K. M.; Kröger, M.; Wiedemann, S.; Schröder, A.; Carstensen, C.: Modeling of Process Machine Interactions in Tool Grinding. B. Denkena and F. Hollmann (Eds.): Process Machine Interactions, LNPE, Springer-Verlag Berlin Heidelberg pp. 143–176, (2013)

2010

Popp, K.M.; Kröger, M.; Li, W.H.; Zhang, X.Z.; Kosasih, P.B.: MRE Properties under Shear and Squeeze Modes and Applications. Journal of Intelligent Material Systems and Structures 21, pp. 1471-1477, (2010)

Journal Veröffentlichungen (ohne peer review)

2014

de Payrebrune, K.M.; Wöllner, U.; Hofmann, T.; Berghoff, K.; Kröger, M.: Investigation of Interaction between Granular Material and a Structure. Selected Dynamical Problems in Mechanical Systems. Editors A. Chudzikiewicz, R. Bogacz, G.-P. Ostermeyer, Verlag Politechniki Warszawskiej pp. 201-214, (2014)

2011

de Payrebrune, K.M.; Kühnert, M.; Kröger, M.: Heat Conduction in Grinding, Machine Dynamics Problems. 35, Nr 4, pp. 92-104, (2011)

2009

de Payrebrune, K.M.; Kröger, M.; Deichmueller, M.; Denkena, B.: Investigation on the Dynamics of Tool Grinding. Machine Dynamics Problems, 33, Nr. 2, pp. 92-104, (2009)

 

Popp, K.M.; Zhang, X.Z.; Li, W.H.: MRE properties under Shear and Squeeze Modes and Applications. 11th conference on Electrorheological Fluids and Magnetorheological Suspensions. Journal of Physics: Conference Series 149, (2009)

Konferenzbeiträge

2016

de Payrebrune, K.M.; O'Reilly, O.M.: An experimentally validated rod model for soft continuum robots. PAMM Proc. Appl. Math. Mech 16 Nr. 1, pp. 317-318, (2016)

2014

Kröger, M.; de Payrebrune, K.M: Parameterreduktion am Reibschwinger durch Ähnlichkeitskennzahlen. PAMM Proc. Appl. Math. Mech, 14, Nr. 1, pp. 301-302, (2014)

 

de Payrebrune, K.M.; Kröger, M.: Parameterstudy of a multi-body friction oscillator. PAMM Proc. Appl. Math. Mech, 14, Nr. 1, pp. 305-306, (2014)

 

de Payrebrune, K.M.; Kröger, M.: Tribologische Untersuchung von Dichtungen in abrasiver Umgebung. Kontakt Workshop, Freiberg, pp. 1-8, (2014)

2013

de Payrebrune, K.M.; Kröger, M.: Kinematic Analysis of Particles in Three-Body-Contact and Granulate Materials. 5th World Tribology Congress WTC, Turin, 1, pp. 709-712, (2013)

 

Doan, Y. T.;.de Payrebrune, K.M.; Kröger, M.: Influence Study of Wear Parameters in three-body Abrasion. 5th World Tribology Congress WTC, Turin, 3, pp. 2607-2610, (2013)

 

de Payrebrune, K.M.; Hofmann , T.; Kröger, M.: Untersuchung der kinematischen Wechselwirkungen zwischen granularen Materialien und Strukturen. Tribologie Fachtagung GfT, Göttingen, pp. 8/1-8/12, (2013)

2012

de Payrebrune, K.M.; Kröger, M.: Hysteresis Effects in Abrasive and Frictional Contacts. PAMM Proc. Appl. Math. Mech, 12, pp. 239 - 240, (2012)

 

Doan, Y. T;.de Payrebrune, K.M.; Kröger, M.: Experimental Investigation of Friction Characteristics on three-body Abrasion with low Applied Loads, Tribologie Fachtagung GfT, Göttingen, pp. 9/1-9/8, (2012)

 

de Payrebrune, K.M.; Kröger, M.: Optische Untersuchungen der Kinematik von Abrasivpartikeln in Drei-Körper-Kontakten, Tribologie Fachtagung GfT, Göttingen, pp. 10/1-10/12, (2012)

2011

Doan, Y. T;.de Payrebrune, K.M.; Kröger, M.: Experimental investigation of three-body abrasive wear with high pressure, 4th GACM Colloquium on Computational Mechanics, (2011)

 

de Payrebrune, K.M.; Kröger, M.: Nonlinear Process-Machine Interaction in Tool Grinding. PAMM Proc. Appl. Math. Mech,, 11, Nr. 1, pp. 927-930, (2011)

2010

de Payrebrune, K.M.; Kröger, M.: Nichtlineares Kontaktmodell für die Schleif-Prozess-Simulation. PAMM Proc. Appl. Math. Mech, 10, Nr. 1, pp. 261–262, (2010)

 

Deichmüller, M.; Denkena, B.; de Payrebrune, K.M.; Kröger, M.; Wiedemann, S.; Schröder, A.; Carstensen, C.: Determination of Static and Dynamic Deflections in Tool Grinding using a Dexel-Based Material Removal Simulation. 2nd International Conference on Process Machine Interactions, pp. 1-12, (2010)

 

de Payrebrune, K.M.; Kröger, M.: Modal Reduction of Dynamics of Tool Grinding. 2nd International Conference on Process Machine Interactions, pp. 1-10, (2010)

2009

Popp, K.M.; Kröger, M.: Nonlinear Interaction Phenomena of Workpiece and Grinding Wheel, 3rd GACM Colloquium on Computational Mechanics, Germany, (2009)

 

Popp, K.M.; Kröger, M.: On Contact Modeling of Workpiece and Grinding Wheel with Nonlinear Elements. 7th EUROMECH Solid Mechanics Conference (ESMC2009), Portugal, pp.1-8, (2009)

2008

Denkena, B.; Deichmüller, M.; Kröger, M.; Popp, K.M.; Carstensen, C.; Schröder, A.; Wiedemann, S.: Geometrical Analysis of the Complex Contact Area for Modeling the Local Distribution of Process Forces in Tool Grinding. 1st International Conference on Process Machine Interactions, pp. 289-298, (2008)

 

Popp, K.M.; Kröger, M.; Deichmüller, M.; Denkena, B.: Analysis of the Machine Structure and Dynamic Response of a Tool Grinding Machine. 1st International Conference on Process Machine Interactions, pp. 299-307, (2008)

 

Popp, K.M.; Kosasih, P.B.; Zhang, X.Z.; Li, W.H.: Fabrication and Characterization of MR Elastomers with high MR Effect, 15th International Congress on Sound and Vibration, pp. 1-5, (2008)

Zum Seitenanfang